If you’re having problems with your boiler, you’re not alone. A boiler is a complex piece of machinery, and it’s not unusual for them to experience problems from time to time. In this blog post, we’ll take a look at some of the most common problems that people experience with their boilers. We’ll also provide some tips on how to troubleshoot these problems and get your boiler up and running again.
Leaking
A problem with an internal component, such as a pressure valve or pump seal, is frequently the source of a boiler leak. If the leak is coming from your pressure relief valve, your system’s pressure is probably too high. The seal could have worn out if the leak was caused by a fault with the pump seal.
Corrosion could be to blame for a leak that has occurred around your system’s pipes. There could potentially be a problem with the way your system was set up. To assist you to identify and resolve this problem, we recommend consulting a skilled engineer. Your engineer may propose that you get a new boiler installed if the leak is caused by a particularly serious malfunction.
The Boiler Pressure Is Low
By looking at the built-in pressure gauge on your boiler, you can typically tell if the pressure is too low. The pressure in your boiler should ideally be set at 1.5 bar. If it is less than one, your boiler will not work properly.
A system leak recently bled radiators, or a failing component or seal can all contribute to low boiler pressure. You can start by looking for visual indicators of a leak, but you should not remove any casings from the boiler. We recommend contacting a Gas Safe registered engineer if you notice a leak. If you are unable to detect a leak, you may choose to repressurize your boiler.
No Heating Or Hot Water
If your boiler isn’t heating up your home or providing you with hot water, then it’s a pretty big problem. This is usually caused by an issue with the thermostat, pilot light, gas supply, or water pressure. If you’re not sure what the problem is, it’s always best to call in a professional.
Frozen Condensate Pipe
A frozen condensate pipe is one of the most common problems boiler owners face during the winter months. When water vapor in the form of steam comes into contact with cold air, it condenses and turns back into liquid water. This liquid water then drains away through a small pipe. If this pipe freezes over, it can cause your boiler to shut down.
If you think your condensate pipe might be frozen, the first thing you should do is turn off your boiler and call a qualified engineer. They will be able to thaw out the pipe and get your boiler up and running again.
Radiator Faults
If your radiators are not heating up evenly, there could be a problem with the way they are balanced. This is a relatively simple problem to fix and can be done by bleeding the radiator.
If your radiators are making strange noises, it could be an indication of a build-up of sludge. This can happen over time as the water in your system starts to break down. The best way to deal with this problem is to have your system flushed and cleaned by a professional.
Boiler Not Responding To Thermostat
One of the most common issues that can occur with a boiler is that it doesn’t seem to be responding to the thermostat. This could be because the thermostat itself is not working properly, or it could be an issue with the wiring. If you’re not sure what the problem is, it’s always best to call in a professional to take a look.
Boiler Making Strange Noises
Another problem that can occur with a boiler is that it starts making strange noises. This could be anything from a loud bang to a high-pitched whine. If you hear any unusual noises coming from your boiler, it’s important to turn them off and call in a professional as soon as possible.
The Pilot Light Keeps Switching Off
A boiler’s pilot light is responsible for igniting the burners inside the boiler, which in turn heats up the water. So, if your pilot light keeps going out, it’s a pretty big problem. There are a few potential causes of this issue:
- The most common cause is that the pilot light flame is too low. This can be caused by a dirty or obstructed burner.
- Another possible cause is a draft coming from the chimney, or another opening in the house. This can disrupt the flow of gas to the pilot light, causing it to go out.
- A faulty thermocouple could also be to blame. The thermocouple is a safety device that senses when the pilot light is lit. If it’s not working properly, it could cause the pilot light to go out.
If you’re having this issue, the best thing to do is call a qualified heating engineer to diagnose and fix the problem.
The Boiler Won’t Turn On (No Power)
If your boiler won’t turn on, the first thing you should check is the power supply. If the boiler is plugged into a socket, make sure the switch at the fuse box is turned on. If it’s hardwired into the mains, then check that the fuse hasn’t blown.
If you’re experiencing any of the problems listed above, it’s time to give Superior Mechanical Services a call. They can help diagnose and solve the issue quickly – so you can get back to living comfortably in your home. And if you need a new boiler installed, they’ve got you covered there too. So don’t wait – call them today!
Do You Need A Boiler Installation Company You Can Trust?
Superior Mechanical Services, Inc. began in 1948 as a family-owned business with a vision to provide value-minded service with a down-to-earth approach to customers throughout the San Francisco Bay Area. As the premier Commercial and Residential Boiler Service provider for Livermore, Dublin, and Pleasanton, Superior Mechanical can do it all, from heating and air conditioning services to boiler services, to plumbing services. Our technicians are certified professionals who will ensure every part of your project is done right using a careful checklist to guide and test each step. At the end of your appointment, we’ll show you how to get the most out of your new system and give you tips on maintenance so it lasts for years to come. Contact us today for amazing service tomorrow!
